Intelligent Tangent Delta Tester of Enamlled Wire
TD-8S
DESCRIPTION
·Tangent Delta Tester is used for testing the curing degree of enamelcover. The curve variation of tgδ shows the curing degree of enamelled wire directly, then adjust the heating temperature of enameling oven, to get a optimal curing degree of enamelled wire, control the wire quanlity effectively.
·The temperature class of enamelled wire can be tested rapidly; the enamel type of wire can be determined preliminarily.
PARAMETER OF TESTER
·working temperatur: normal atmosphere temperature ~350℃
·with rapid cooling system
·Test range of enamlled round wire：ф0.018-5.0mm
·Test range of enamelled flat wire: ≤5×16mm
·Testing time: about 2~3 minutes
·Testing frequency: 1KHz
·Two upper limits of D value measuremnt: 0~0.1、0~0.2
·Testing accuracy: ±1℃
·Resolution: 0.0001 or 0.00001
·Power supply: AC220V±10%
·Dimension: L×W×H＝480mm×500mm×320mm
·Weight: 35kg
Feature of Instrument
·Comply with standard GB/T4074.5-2008, IEC60851-5.6.
·New appearance, light and beautiful, the operation is more convenient.
·As the third generation intelligent Tangent Delta Tester, there are complete update on clamping jaw and heating unit .
·The feeding, positioning and exit of the clamping jaw are operated automatically, The feeding, positioning and exit of the clamping jaw are operated automatically, The feeding, positioning and exit of the clamping jaw are operated automatically, The feeding, positioning and exit of the clamping jaw are operated automatically,
·Comparison function of 5 tgδ-T curve
