Current:Home > PRODUCTS > Enameled wire tester
Enameled wire tester

Less Strength Elongation Tester

Less Strength Elongation Tester

Instrument Description

- Take three samples of enamelled wire 400 mm  in length,paying attention to handle them with care avoiding deformationwhich will false the final test result. The sample shall then be placed between two jaws at a distance of 254mm, a pre-load of51,75 N/mm.The comparator used to measure the softness must be zeroed, double the test weight (103,5 N/mm”for a time of 30”, take out then the doubled weight, read on comparator the value, then calculate the low stress elongation value with thefollowing formula:

L.S.E = Δall/10x 100

Calculate then the average of three measurements.


LSE

- Suitable for wire diameter range from 0,1 up to 1,60 mm

- Supplied with three pre-load and three load weights.

- Digital comparator resolution 0,001 mm


LSE-PC

- Suitable for wire diameter range from 0,10 up to 3.15 mm

- Computerised version, the use is suitable also for unskilled personnel, doesnt need pre-load and load weights, so complicated calculation for their value are avoid, the traction force is determine by means the use of an high resolution load cell.

- Print-out of each single result with calculation of minimum,maximum, average and standard deviation values.